BogaudioModules

commit bc7cc0b591bdc26bebff75e3f887f33ac2530d61
parent 1d02dae25b3ad18af3996bc581026dfad9fa4bad
Author: Matt Demanett <matt@demanett.net>
Date:   Sat, 28 Nov 2020 16:48:41 -0500

Merge pull request #157 from giacecco/patch-1

Clarifies scale and offset use in the LFO modules.
Diffstat:
M
README.md
 | 
2
+-

1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/README.md b/README.md
@@ -167,7 +167,7 @@ A standard LFO featuring:
   - Reset (hard sync) input.
   - Slow mode.
 
-LFO tracks pitch CVs at the V/OCT input seven octaves lower than a normal oscillator: with a 0V input, the output frequency is note C-3 (2.04HZ).  The frequency knob is calibrated in linear volts (the small ticks), and its value is added to the input V/OCT.  With no input, the frequency range is from approximately 0.1 to 400HZ; with CV the frequency may be driven up to 2000HZ or down to arbitrarily low values.  In slow mode, the output frequency tracks the controls four octaves lower than otherwise (11 octaves below a normal oscillator).
+LFO tracks pitch CVs at the V/OCT input seven octaves lower than a normal oscillator: with a 0V input, the output frequency is note C-3 (2.04HZ).  The frequency knob is calibrated in linear volts (the small ticks), and its value is added to the input V/OCT.  With no input, the frequency range is from approximately 0.1 to 400HZ; with CV the frequency may be driven up to 2000HZ or down to arbitrarily low values.  In slow mode, the output frequency tracks the controls four octaves lower than otherwise (11 octaves below a normal oscillator). Output is `(lfo * scale / 100) + offset`.
 
 _Polyphony:_ <a href="#polyphony">Polyphonic</a>, with channels defined by the V/OCT input.