commit 7504d468640cf2b014e826c410eb501e2536f93d
parent 282a57b742a0f250d7aa03b0573e6eb9f889a75b
Author: Keith Bloemer <32459398+GuitarML@users.noreply.github.com>
Date: Mon, 24 May 2021 19:33:10 -0500
Update README.md
Diffstat:
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/README.md b/README.md
@@ -1,6 +1,7 @@
# NeuralPi
-NeuralPi is a guitar pedal using neural networks to emulate real amps and pedals on a Raspberry Pi 4. The NeuralPi software is a VST3 plugin built with JUCE, which can be run as a normal audio plugin or cross-compiled to run on the Raspberry Pi 4 with [Elk Audio OS](https://elk.audio/). NeuralPi is intended as a bare-bones plugin to build on. The pedal runs high quality amp/pedal models on an economical DIY setup, costing around $120 for hardware to build yourself. Check out a video demo on [YouTube](https://www.youtube.com/watch?v=_3zFD6h6Wrc)
+NeuralPi is a guitar pedal using neural networks to emulate real amps and pedals on a Raspberry Pi 4. The NeuralPi software is a VST3 plugin built with JUCE, which can be run as a normal audio plugin or cross-compiled to run on the Raspberry Pi 4 with [Elk Audio OS](https://elk.audio/). NeuralPi is intended as a bare-bones plugin to build on. The pedal runs high quality amp/pedal models on an economical DIY setup, costing around $120 for hardware to build yourself. Check out a video demo on [YouTube](https://www.youtube.com/watch?v=_3zFD6h6Wrc)<br>
+Check out the step by step build guide published on Towards Data Science [here](https://towardsdatascience.com/neural-networks-for-real-time-audio-raspberry-pi-guitar-pedal-bded4b6b7f31)

@@ -40,7 +41,7 @@ If you need to revert back to the original state, remove the ```/tones``` folder
## To Do
-Currently, the NeuralPi plugin has no user controls. It runs a single model that can be swapped out before running the plugin. The next step is to add user controls via OSC messages, so that a remote instance of the plugin can control the NeuralPi over Wifi. These controls will include Gain/Volume, EQ, and model selection.
+Currently, the NeuralPi plugin running on Elk OS has no user controls. It runs a single model that can be swapped out before running the plugin. The next step is to add user controls via OSC messages, so that a remote instance of the plugin can control the NeuralPi over Wifi. These controls will include Gain/Volume, EQ, and model selection.
Elk Audio OS also supports physical controls through [Sensei](https://github.com/elk-audio/sensei). Gain/Volume and EQ knobs can be added, as well as a LCD screen for selecting different models. One could build an actual guitar pedal with NeuralPi and any number of other digital effects and controls.